Common Toilet Plumbing Issues and Their Fixes

There are many reasons why a problem may occur in your toilet plumbing system. The toilet tank should be the starting point of your investigation when experiencing such issues. As they are required to perform complex actions, toilet tanks are usually working with a lot of pieces that are worn out.

Clogged Toilet

clogged toilet is considered to be a simple issue that can somewhat easily be solved with your own two hands. This is a common situation that usually requires only a plunger. Before using a plunger, have the toilet half-filled with water and place towels around the area in order to prevent damage to the flooring. If you don’t know how to use a plunger properly, do some research on the internet. If the plunger doesn’t solve the problem, call an expert.

The Phantom Flusher

If you hear the toilet tank filling with water even when you didn’t flush the toilet, you might be having a flapper that is worn out. This problem is referred to as the phantom flusher. The flapper is used to turn the ball cock valve on when the water level in the tank drops. These flappers are inexpensive and can be replaced easily.

Leaky Toilet Base

If you spot some water on the floor around the toilet, you should contact a plumber. Keep in mind that you shouldn’t attempt to use the toilet until it’s fixed. In most of the cases, the wax ring at the base of your toilet is responsible for the issue. Resolving this problem involves having your toilet removed from the floor.

Water Runs Constantly

This problem may not only annoy you but can make your water bills higher as well. Having the water running constantly in your toilet can be caused by variety of things. The first thing that you should do is detect the reason of the toilet’s leakage. Some of the usual culprits include faulty flappers, broken fill valves, low or high water levels, water-logged floats and mineral deposits. If you don’t want to spend a lot of time dealing with this issue, you should probably call an expert.

Toilet Barely Flushes or Doesn’t at All

In case the water barely flushes, check the chain between the lever and flapper. If it’s bulging downward, make sure to shorten the chain for a link. While checking the chain, be sure to look if your tank is filling up to the water line. If it isn’t, bend the float arm upward to increase the flow. If these actions don’t solve the issue, you’ll probably need to replace the fill valve.

If you have a valve that is used for manipulating toilet water, low water pressure may occur due to the water main valves not being set to maximum. Water main valves are usually placed on the entrance of the pipes that coordinate toilet water.

In case your water doesn’t flush at all, avoid pulling the handle too many times. If a toilet is clogged, additional flushing may worsen the situation. If you’re lucky enough, the simplest complication you can face is a broken handle. Be sure to check connections between each part of the toilet’s tank.

Calling an Expert

Although you can attempt and even successfully fix certain toilet plumbing issues, you will most likely just temporarily fix the problem. If you have the money, it’s always a better option to call an expert. No matter what problem you may have, you can rely on SPS plumbers in Sydney to fix it for you.

However, know that you shouldn’t always wait for a problem to occur in order to call plumbers. It’s always a good idea to schedule regular plumbing maintenance to ensure that you never face problems in the future.